|Name||:||Air Cdre Md. Abdus Salam, BPP, psc|
|Address||:||Department of Aeronautical Engineering (AE),
Military Institute of Science and Technology (MIST),
Mirpur Cantonment, Dhaka-1216, Bangladesh.
|Masters of Science in Aeronautical Engineering (China)|
|Beijing University of Aeronautics and Astronautics, China|
|Bachelor of Science in Mechanical Engineering|
|Bangladesh University of Engineering and Technology (BUET)|
|Masters of Defence Studies|
|Bangladesh National University (NU)|
|Professor and Head of Department of AE, MIST Sept 2008 till Date
Instructor Class A, Acting Head and GSO-II
March 2003 to June 2005, July 2007 to Sept 2008, Nov 2009 to April 2000
ME Dept, MIST
Computational Fluid Dynamics
Aircraft Structure Analysis
|AEAS 101, Introduction to Aeronautical Engineering,
AEAS 207, Basic Thermodynamics,
AEAS 215, Aircraft Systems,
AEAS 303, Applied Aerodynamics and CFD
AEAS 305, Aerospace Propulsion
AEAS 413, Space Engineering
AEAS 419, Maintenance Management and Repair of Aircraft.
|||Design and fabrication of lunar robot (Participated in NASA’s 3rd Lunabotics Mining Competition 2012)|
|||Design and Analysis of Unmanned Air Vehicle (UAV) By Using NACA 0012 Aerofoil Profile|
|||Design and Construction of a subsonic wind tunnel and study of aerodynamics over a full body aircraft.|
|||Study of magnus effect on airfoil.|
 Salam, M.A., Deshpande, V., Khan, N. and Ali, M.A.T. 2019. “Numerical Analysis of Effect of Leading-Edge Rotating Cylinder on NACA0021 Symmetric Airfoil”, European Journal of Engineering Research and Science. Vol. 4, No. 7 (Jul. 2019), 11-17. DOI:https://doi.org/10.24018/ejers.2019.4.7.1385.
 Md Abdus Salam, Md Jalal Uddin Rumi, NC Chattopadhay, “Aerodynamic Analysis of Flapping Wing”, MIST Journal, Volume 2, No. 2, December 2013.
 Gp Capt Md Abdus Salam, Dr M. A Taher ali, S. M. Anwarul Aziz, Asif Iqbal, Md. Mijanur Rahman & Istaqur Rahman, “Design And Fabrication of Bench Mounted Closed Loop Wind Tunnel”, vol 2, pp 69-74, MIST Journal, 2013[ISSN: 2224-2007].
 Gp Capt Md Abdus Salam, Gp Capt Nc Chattopadhyay, Nazifa Tasnim & Asif Bin Hossain, “Role of Chevrons in Engine Noise Control”, vol 2, pp 61-68, MIST Journal, 2013[ISSN: 2224-2007].
 Md Abdus Salam, Nc Chattopadhyay, Jalal Uddin Rumi, H.E.M.Zahidul Islam Eunus, “Jet Noise Menace: A review”, vol 1, pp 62-70, MIST Journal, 2012[ISSN: 2224-2007].
 Md Abdus Salam, NC Chattopadhyay, “Together We Grow….. In the limitless sky”, vol 1, pp 32-34, MIST Journal, 2012[ISSN: 2224-2007].
 Md. Abdus Salam, Bhuiyan Shameem Mahmood Ebna Hai, “Study on Mechanical Product Based Small and Medium Enterprises of Bangladesh and Improvement of A Selected Product”, vol 2, pp 26-30, Galaxy, 2010 [ISSN: 2073-6444].
 Bhuiyan Shameem Mahmood Ebna Hai, Md. Abdus Salam, “Study of Aerodynamics of a Cricket Ball”, vol 1, pp 23-25, Galaxy, 2009 [ISSN: 1999-2009].
 Md Abdus Salam, Md Jalal Uddin Rumi, NC Chattopadhay, “Aerodynamic Analysis of Flapping Wing over Fixed Wing”, IACSIT International Journal of Engineering & Technology, Volume 6, No 2 April 2013.
 Jahangir, G. M., Salam, A., “Aerodynamic Characteristics of Biplane Configurations Using NACA 0024 Profile”, ICME 2007, BUET, Dhaka.
 Gp Capt Abdus Salam, Sqn Ldr Saifur Rahman Bakaul ,Fairus Sakib Tanzim , Kh MD. Faisal,“Design and fabrication of a micro-class unmanned aerial vehicle (UAV) with high payload fraction”, ICMIEE-2014 26-27 December, KUET, Khulna.
 Md. Abdus Salam, Md. Rayhan Afsar, Md. Abu Horaira Banna, Zahangir Mohammad Shahjahan Ali, “Design, Analysis & Optimization of a Small Unmanned Aircraft”, 2015 IEEE Aerospace Conference, Big Sky, Montana, U.S.A., March 7-14, 2015.
 Md. Nurul Huda, Tabassum Ahmed, SM Shakil Ahmed, Md. Abdus Salam, Md. Rayhan Afsar, Kh. Md. Faisal, M. A. Taher Ali, “Study of NACA 0010 symmetric airfoil with leading edge rotating cylinder in a subsonic wind tunnel”, 11th International Conference on Mechanical Engineering, BUET, 2015.
 Md. Afzal Hossain, Md. Abdus Salam, Md. Rayhan Afsar, Kh. Md. Faisal, M. A. Taher Ali, “Design and Optimization of a Long Range Jet Aircraft”, ICMIME 2015, RUET, Rajshahi, Bangladesh.
 Md. Nurul Huda, Tabassum Ahmed, SM Shakil Ahmed, Md. Abdus Salam, Md. Rayhan Afsar, Kh. Md. Faisal, M. A. Taher Ali, “Study of NACA 0010 Symmetric Airfoil with Leading Edge Rotating Cylinder in a Subsonic Wind Tunnel”, 11th International Conference on Mechanical Engineering, ICME 2015, BUET, Dhaka.
 M. I. Khan, M. A. Salam, M. R. Afsar, M. N. Huda, T. Mahmud, “Design, Fabrication & Performance Analysis of an Unmanned Aerial Vehicle”, 11th International Conference on Mechanical Engineering, ICME 2015, BUET, Dhaka.
 Md. Abdus Salam, S.M Anwarul Aziz, Muhammad Maruf Islam, Kh. Md. Faisal, Md. Arafat Islam, “ Design and Fabrication of an Autonomous Surveillance Hexacopter”, ICMERE 2015, CUET, Chittagong, Bangladesh.
 Md. Abdus Salam, Md. Rayhan Afsar, Md. Abu Horaira Banna, “Next Generation Hybrid Power Plant: A Solution to continuous Flight”, AIAA Student Conference, Australia.
 Shoyon Panday, Nafiz Ahmed Khan, Md Rasel, Kh Md Faisal, and Md Abdus Salam. “ Comparative assessment of turbulence model in predicting airflow over a NACA 0010 airfoil.“; 7th BSME International Conference on Thermal Engineering, BUET, 2017.
 Nafiz Ahmed Khan, Md Abdus Salam, Kh Md Faisal, and Debanan Bhadra. “ Computational study of airfoil performance with the incorporation of a moving surface at the leading edge.“; 12 TH International Conference on Mechanical Engineering, BUET, 2017
 Md. Aktharuzzaman, Md Samad Sarker, Wasiul Safa, Nahreen Sharah, and Md Abdus Salam. “Development of an experimental setup for analyzing the influence of Magnus effect on the performance of airfoil“; ICMEAS, MIST, 2017.
 Md. Abdus Salam,Vikram Deshpande, Shoyon Panday, Nafiz Ahmed Khan and M. A. Taher Ali, “Improvement in aerodynamic performance of NACA 0021 airfoil using moving surface boundary layer: a computational study”, The 8th BSME International Conference on Thermal Engineering, BUET, 2018.
 Prospect of Aeronautical Engineering in Bangladesh, Air Cdre Md Zakiul Islam, Gp Capt Md Abdus Salam, Flt Lt Shaikh Firdous Mahmood. The paper was presented on a national seminar “ Prospect of Aeronautical Engineering in Bangladesh” held at MIST on 02 October 2010.
 The Impact of Aviation on Development of Tourism in Bangladesh, Gp Capt Abdus Salam, Nasrul Anis Meraj and Dr. Abdullah-Al-siddique. The paper was presented on a national seminar “ Prospect of Aeronautical Engineering in Bangladesh” held at MIST on 02 October 2010.
 Gp Capt Abdus Salam, Departmental Head AE and Bhuiyan Shameed Mahmood (Ex-faculty) has written a book named “Study of Aerodynamics of a Cricket Ball” published by LAP Lambert Academic Publishing, ISBN: 978-3-659-29532-4.